-
Item# NE8FDX-Y6
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing.
etherCON provides solutions for data transfer in harsh and demanding applications. These connectors are especially applicable for Ethernet networking in audio, commercial, entertainment, live stage production, DMX lighting, industrial and outdoor internet access environments. The etherCON series offers tailor-made products to suit all state-of-the art transmission classes like CAT6A, CAT6, CAT5e as well...
Our Price: $15.09
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# NE8MX6
etherCON CAT6A cable connector self-termination, nickel plating
The set NE8MX6 consists of a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A compliant RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG 27 to 22 solid or stranded wire.
Attention! Does not intermate with CAT6 chassis connectors.
Features: Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and...
Our Price: $12.34
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# NE8MX6-B
etherCON CAT6A cable connector self-termination, black plating
The Neutrik NE8MX6 set includes a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and gauge of AWG 27 to 22 solid or stranded wire. This self-termination version is water protected according to IP65.
Attention! Does not intermate with CAT6 chassis connectors.
Features: Ruggedized connector...
Our Price: $14.26
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# NO2-4FDW-A
The Neutrik NO2-4FDW-a is a chassis connector with black chromium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket. It's waterproof to IP65 standards and has a front panel mount. This opticalCON connector now features a new split sleeve clip design for the opticalCON DUO chassis. The new clip design allows for higher split sleeve push-out forces without changing the dimensions of opticalCON chassis.
The chassis connector acts as a "feed-through" allowing simplified...
-
Item# NE8FDX-P6-B
Neutrik D-shape CAT6A panel connector, shielded, feedthrough, Nickel housing.
etherCON provides solutions for data transfer in harsh and demanding applications. These connectors are especially applicable for Ethernet networking in audio, commercial, entertainment, live stage production, DMX lighting, industrial and outdoor internet access environments. The etherCON series offers tailor-made products to suit all state-of-the art transmission classes like CAT6A, CAT6, CAT5e as...
-
Item# NC3MXX-B
The Neutrik NC3MXX-B next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
3 pole male cable connector with black metal housing and gold contacts.
Features: Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides...
Our Price: $3.61
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# NC3FXX-B
Neutirk NC3FXX-B 3 pole female cable connector with black metal housing and gold contacts.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
Tech Note : Do not assemble XX connectors without the cable installed. This will cause the pressure chuck to tighten and disassembly...
Our Price: $4.11
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# NO4FDW-A
Neutrik NO4FDW-A Chassis connector, black chromium plating, front panel mount, IP65 ingress protection in mated condition with SCDP-*.
The chassis connector acts as a "feed-through" allowing simplified installations by connecting four conventional LCs on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Features: Rugged 4-channel Point-to-Point multichannel...
-
Item# NC3FX
Neutrik NC3FX 3 pole female cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features: Rugged zinc diecast shell, long lasting and durable
Chuck type strain relief system for secure clamping of cables
Boot with rubber gland gives high...
-
Item# NAC3FX-W-TOP
The NAC3FX-W-TOP is a 20 amp Locking female cable connector with screw terminals. The powerCON TRUE1 True Outdoor Protection (TOP) is a locking 20 Amp true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 True Outdoor Protection (TOP) is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected...
-
Item# NC3MX
Neutrik NC3MX Male 3-Pin XLR Connector with Nickel Shell and Silver Contacts
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
3 pole male cable connector with Nickel housing and silver contacts.
Features: Rugged zinc diecast shell, long lasting and durable
Chuck type strain relief...
-
Item# NC3MXX
Neutrik NC3MXX 3 pole male cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features: Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides...
Our Price: $2.61
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# NA2-IO-DLINE
Connect your legacy audio gear to the Dante® world. The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante® network. Simultaneously, NA2-IO-DLINE converts a Dante® stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante® network while at the same time receiving a mix from another Dante® source.
Neutrik NA2-IO-DLINE is designed...
-
Item# NAC3FCA
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
Features: Locking 20 A / 250 V ac appliance coupler
3 contacts for line,...
-
Item# NC3FXX
Neutrik NC3FXX 3 pole female cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
Tech Note : Do not assemble XX connectors without the cable installed. This will cause the pressure chuck to tighten and disassembly will...
-
Item# NAC3FCB
Neutrik NAC3FCB lockable cable connector, power-out, screw terminals, grey
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under...
-
Item# NAC3FPX-ST-TOP
The NAC3FPX-ST-TOP powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
Features: Heavy duty sealed power connector for harsh and demanding environment
Outdoor protection...
Our Price: $11.12
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# NAC3MX-W-TOP
The NAC3MX-W-TOP is a locking male cable connector with screw terminals. The powerCON TRUE1 True Outdoor Protection (TOP) is a locking 20 A (16A VDE) true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
...
-
Item# NE8FDY-C6-B
The etherCON CAT6 D-shape panel connectors with black metal housing and secure latching system offer a tool-free and gas-tight IDC termination, which makes cable assembly easy and fast.
NOTE: Not intermateable to etherCON Cat 5 or Cat 6A NE8MX* cable connectors Features: CAT6 compliant - data rate up to 10 GBit/s
CAT6 performance - fast data transmission and high bandwidth applications
CAT6 specifications according TIA / EIA 568B, ISO / IEC 11801, EN 50173
IP65 - Dust and...
-
Item# NC5FDM3-HPCBRJ45
The Neutrik CONC5FDM3HPCBRJ is a Unified D Series M3 Tapped Panel Mount with PCB Connection
Specifications: Neutrik 5 pole female receptacle
Horizontal PCB mounting
Nickel housing and silver contacts with M3 mounting holes
RJ45 Female
Frequency bandwidth: 1 - 100 MHz
Rated current: 1.5 A
Dielectric strength: 1000 V ac rms
Contact resistance: < 10 m
Insulation resistance: > 500 M
Category 5e
Our Price: $28.13
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# NAHDMI-W-B
2 Colors AvailableNeutrik NAHDMI-W-B HDMI 2.0 feedthrough adapter, black D-shape housing.
Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.
Features: To transmit any digital TV and PC video format including high-definition video (HDTV)
HDMI 2.0 feed through adapter with 19-pole HDMI receptacle at both ends
Dust and water resistant acc. to IP65 safety standard in combination with NKHDMI-*
Optional...
Read More
-
Item# NC3FXX-BAG
Neutrik NC3FXX-BAG 3 pole female cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features: Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent...
-
Item# NC3FX-B
Neutrik NC3FX-B 3 pole female cable connector with black metal housing and gold contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Features: Rugged zinc diecast shell, long lasting and durable
Chuck type strain relief system for secure clamping of cables
Boot with rubber gland gives high...
-
Item# NBNC75BDD6X
The Neutrik NBNC75BDD6X rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.
Optimized Return Loss
Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return...
-
Item# NE8FDP
2 Colors AvailableThe etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features: Accommodates...
Read More